Tuesday, 4 October 2011

Machining principles

1. What type of machine tools that control the movement of cutting tool automatically by using special programs?




2. Why the understanding and reading of technical drawings is important in the machine shop?




3. What is the main function of the lathe machine?




4. High Speed Steel cutting tool is used to cut 50 mm diameter Aluminum workpiece shown below. Write the steps of calculating the correct spindle speed do this cutting on the lathe machine?
Posted by at

21 comments:

  1. ahmed abdul samad 12-015 October 2011 at 21:35

    1) cross slide

    2) because it represent surfaces, edges, and contours of a workpiece. By adding symbols, dimension lines and sizes

    3) used for producing cylindrical work pieces

    4) roughing: 388.3 r/min

    finishing: 592 r/min

    ReplyDelete
  2. Humaid Abdulla - 90133 - 12-015 October 2011 at 21:35

    1- Cross slide

    2- Because when we understand how the machine is working we will work on it with no problem and no difficult.

    3- use for reducing cylindrical work pic.

    4- roughing - 388.3 r/m
    finishing - 592 r/m

    ReplyDelete
  3. Samir Hamasha5 October 2011 at 21:37

    Dear Mr. Osama,

    I appreciate your hard work on provididng your students with differents kinds of online activitis through this blog and Quia website , which will surely inhance the students understanding.

    All the best for you and your students

    Samir hamasha
    Mechanical Department Lead Teacher

    ReplyDelete
  4. mohammad abdulla 12.056 October 2011 at 01:27

    1- CNC machine tools

    2- to show the hidden details in the obiect

    3- to make cylindrical shapes

    4- first we check the table of cutting speed for aluminum, we check for roughing and finishing then we apply the formula and we solve

    ReplyDelete
  5. Ali Jassim 12.56 October 2011 at 01:35

    1-CNC machine

    2-To know understand how the machine is working.

    3-To make cylindrical material

    4-roughing: 388 RPM

    ReplyDelete
  6. Mohamed Ahmed Mohamed Ali - 12.56 October 2011 at 01:36

    1) CNC

    2) to show the details and distance correctly

    3) power-driven, general-purpose machine tool used for producing cylindrical work-pieces

    4) roughing: 388.3 RPM

    finishing: 592 RPM

    ReplyDelete
  7. Ahmed Adnan 12-56 October 2011 at 01:45

    1- Cross slide

    2- Because if we understand we will not face any problems or any difficulties,

    3- It is used for producing cylindrical work-pieces.

    4- first we have to know the high speed steel for example aluminum or steel and then we have to calculate the roughing and finishing to produce spindle speed.

    ReplyDelete
  8. Anonymous11 October 2011 at 02:12

    1-CNC
    2-To practice before and not to make mistake after
    3-To produce cylindrical workpiece
    4-USE the fomula and check the table for the mesurment

    ReplyDelete
  9. marwan mohamed 12.0911 October 2011 at 02:27

    1-CNC
    2-To practice before and not to make mistake after
    3-To produce cylindrical workpiece
    4-USE the fomula and check the table for the mesurment

    ReplyDelete
  10. ahmed mohammed ali11 October 2011 at 02:52

    ahmed mohammed ali 12.9 st1021090024
    1) CNC

    2) to show the details and distance correctly

    3) power-driven, general-purpose machine tool used for producing cylindrical work-pieces

    4) roughing: 388.3 RPM

    ReplyDelete
  11. ahmed abdulrahman 12-0911 October 2011 at 03:06

    1- CNC The computerized one
    2- for practicing and not making any mistakes
    3- To produce cylindrical workpiece
    4- by using the formula, you put the cs/pie D

    ReplyDelete
  12. Abdulla Khalil 12/09 9001111 October 2011 at 03:08

    Abdulla Khalil 12.09 90011

    1) CNC

    2) Because when we understand how the machine is working we will work on it with no problem.

    3) used for producing cylindrical work pieces

    4) roughing: 388.3 r/min

    finishing: 592 r/min

    ReplyDelete
  13. mohammed jassim 12.09 st102109026011 October 2011 at 03:18

    1)CNC machine.

    2)because the details and distance correctly.

    3)To produce cylindrical workpiece

    4)using the formula and take number of the Material

    ReplyDelete
  14. Mohammed Habib 12-0911 October 2011 at 03:22

    mohammad abdulla 12.05 said...

    1- CNC machine tools

    2- to show the hidden details in the obiect

    3- to make cylindrical shapes

    4- first we check the table of cutting speed for aluminum, we check for roughing and finishing then we apply the formula and we solve

    ReplyDelete
  15. Khalid Jamal + Sultan Majid 12.0911 October 2011 at 03:24

    1-CNC
    2-To practice before and not to make mistake after
    3-To produce cylindrical workpiece
    4-USE the fomula and check the table for the mesurment

    ReplyDelete
  16. humaid abdulla aljasmi /abdullaziz omer alswaidi(12.09)11 October 2011 at 03:26

    12.09

    1-CNC
    2-To practice before and not to make mistake after
    3-To produce cylindrical workpiece
    4-use the formal and check the table and check the speed of Aluminum

    ReplyDelete
  17. ali abdulla 12.0530 October 2011 at 09:18

    1.CNC machine
    2.To show the details and distance correctly
    3.Produce cylindrical workpiece
    4.Check the table of cutting speed for aluminum, then we see for roughing and finishing then we apply the formula.

    ReplyDelete
  18. Mohammed Ibrahim Awad 12-121 November 2011 at 11:28

    1-CNC machine tool
    2-To practice before and not to make mistake after
    3-To produce cylindrical workpiece
    4-USE the fomula and check the table for the measurement

    ReplyDelete
  19. Anonymous2 November 2011 at 01:21

    mohammad ismail hattawi 90113
    12-12

    1.CNC machine
    2.To show the details and distance correctly
    3.cuts metal chips to make a shape
    4.Check the table of cutting speed for aluminum, then we see for roughing and finishing then we apply the formula.

    ReplyDelete
  20. Anonymous12 November 2011 at 04:14

    1) CNC
    2) to show the details and distance correctly
    3) to make cylindrical shapes
    4) Check the table of cutting speed for aluminum, then we see for roughing and finishing then we apply the formula.

    Salem Saleh
    12-12

    ReplyDelete
  21. Oleg1 May 2020 at 08:16

    I want to share a testimony on how Le_Meridian funding service helped me with loan of 2,000,000.00 USD to finance my marijuana farm project , I'm very grateful and i promised to share this legit funding company to anyone looking for way to expand his or her business project.the company is funding company. Anyone seeking for finance support should contact them on lfdsloans@outlook.com Or lfdsloans@lemeridianfds.com Mr Benjamin is also on whatsapp 1-989-394-3740 to make things easy for any applicant. 

    ReplyDelete

Subscribe to: Post Comments (Atom)